BoardProfiler 3D-L - Sawmill board scanner for lineal conveyors
The BoardProfiler 3D-L is a complete board scanning and optimisation system for linear board transportation. The system provides optimisation for edgers and rips saws or for applications for shape optimisation and classification. Two sensors are required one mounted above and the other below the conveyor scanning the entire board width. The scanners measure the board thickness, width, wane and cup at a rate of between 1000 to 3000 profiles per second. The BoardProfile-L uses our latest generation ProfiCura 2D laser profile sensors and can scan boards up to 600 mm width. The installation is very simple and the two sensors are easily retrofitted on existing lines keeping cost low.
|Laser line length (FOV)||Stand off||Supply||Profiles/sec|
|600 mm||600 mm||24 VDC & 230 VAC||1000-3000|
The BoardProfiler 3D-L uses our ProfiCura sensor which is our latest generation that uses the principle of 2D laser triangulation to capture the actual profile of boards. A laser line of length 600 mm is projected onto the board, this line is viewed with a matrix camera. This technique allows the entire board cross section profile to be captured in a single shot.
Features & Applications
- Board shape optimisation and classification
- Edger and rip saw optimisation
- Measurement of width, thickness and wane along the entire length of the board.
- Measurement and location of wane along the entire length of the board.
- Detection of cup and orientation
- Pallet and floor board production