Dynascan MediTEST

Reactive Force Packaging Testing Equipment

Reactive Force Packaging Testing

MediTEST provides advanced, non-destructive seal integrity testing, operating on the established principle of measuring the reactive force generated by a pack when subjected to vacuum. An essential piece of quality assurance equipment for testing all types of packages that are used in the pharmaceutical, consumer products or medical devices.  For testing filled sachets, bags, blister trays testing kits and pouches, only a few seconds are required to detect holes down to a size of 10 microns. Non-destructive testing allows for flawless packaging to be reintroduced to the production line, significantly reducing waste and cost.

The MediTEST provides easy to read results, indications and graphical test data to aid analysis. Users can store test and meta-data in compliance with 21CFR Pt 11 and output these to a printer.

The modular and flexible design allows the packaging leak detection system to be optimised for each product application maximising sensitivity and minimising test time. A self-adjusting sensor system virtually eliminates the requirement for specialist tooling, with a front-loading tray enhancing ease of use.

Standard MediTEST systems can test either two, four or ten pouches simultaneously, with custom configurations can be provided to suit special customer application.


  • No specialist tooling required
  • Detect holes down to 10µm
  • Two, four or ten standard pack testers with other sizes available
  • Stainless steel casework and CGMP compliance
  • Advanced software for easy perimeter setup
  • Short test cycle time
  • USB and RS232 for easy data retrieval or storage


MediTEST Vacuum force leak detection system with computer control and touchscreen HMI
Custom configurations available
Limit of Detection Better than 10 microns hole diameter
(Performance is a function of pack size, vacuum level and head space)
Test Cycle Time Down to 10 seconds
(Performance is a function of pack size, vacuum level and head space)
Number of packs Two, four or ten packs simultaneously
Custom configurations available
Pack dimensions 2 channel – 140 (L) x 180(D) x 35(D)
4 channel – 140(L) x 90(W) x 35(D)
HMI Display 8.4” to 17” colour display with touchscreen
Voltage 110/230V, 50-60Hz
Interface USB and RS232
Compressed air 6 bar (200l/min)
Dimensions Bench mounted or workstation, dependant on the configuration
Materials Grade 304 stainless steel casework
Compliance Can operate in compliance in 21CFR pt 11
Standards CE marked

Download MediTEST Datasheet