MIKRON Calibration Sources

Highly accurate calibration equipment for pyrometers, thermal imaging cameras, radiometers, heatflux and spectrographic measurement systems

Blackbody calibration sources are infrared radiators used for calibrating and verifying the output signals of infrared thermometers (pyrometers), thermal imaging systems, heat flux measurement systems, or spectrographic analysis systems. LumaSense supplies a unique selection of very precise calibration sources that are traceable to national standards. Depending on the calibration source, a single temperature point or temperature curves of an infrared measurement device can be monitored and recorded. LumaSense also supplies transfer-standard pyrometers (TSP) which is a special a high accuracy pyrometer used to transfer temperature data from a primary infrared source to other calibration sources.

Model Note Temp Range
Mobile Mobile calibration unit 250…1300°C
Mobile Mobile calibration unit 550…1300°C
M316 Low temp 5…300°C
IRC 45 Low temp 45°C
IRC 70 Low temp 70°C
IRC 75 Low temp 75°C
IRC 95 Low temp 95°C
IRC 100 Low temp 100°C
IRC 110 Low temp 110°C
IRC 120 Low temp 120°C
IRC 140 Low temp 140°C
IRC 150 Low temp 150°C
M340 Low temp -20…150°C
M310-HT Med temp 5…450°C
M315-HT Med temp 5…600°C
M315X Med temp 5…400°C
M315X-HT High temp 5…600°C
M345X (X12) Low temp 0…150°C
M345X (X4, X4D, X6, X8, X12) Low temp 0…170°C
M345C-LC Low temp -40…100°C
M300 Med temp 200…1150°C
M305 Med temp 100…1000°C
M360 Med temp 50…1100°C
M330-EU High temp 300…1700°C
M335 High Temp 300…1500°C
M390 (A1, A2) High temp 600…2300°C
M390 (B1, B2) High temp 600…2600°C
M390 (C1, C2) High temp 600…3000°C
M390 (L1) High temp 300…2000°C
M390 (S, 2 piece) High temp 600…3000°C

Download Temperature Calibration Sources Overview Brochure
Download IMPAC transfer standard pyrometer IS 12-TSP & IGA 12-TSP  Datasheet