Sawmill Thickness Gauge
The TSorter is a non-contact sawmill thickness and width measurement gauge for sorting wood in sawmills. The timber can either be in the green or dry condition is measured in-process on the transverse conveyor.
|Thickness Range||Thickness Accuracy||Width Accuracy (Typical)||Laser Measuring Rate|
|0-200 mm||±0.1 mm||±1.0 mm||2000 Hz|
The thickness is measured with two PreciCuraSR sensors, which use the principle of optical laser triangulation and will measure any type of wood material. The width is measured by measuring the time the board takes to pass the lasers.
- Thickness measurement of planks on a transverse conveyor
- Thickness and width grading of wood
- Green timber sorting
- Thickness at planers
- Width and thickness sorting of sawn timber
The TSorter uses LIMAB’s standard PreciCura laser triangulation sensors, which are a product of over 25 years of experience in producing precision laser sensors. The unique laser sensors are robust, rugged yet very accurate and stable.
The laser measuring principle means that the timber is measured without contact, eliminating regular maintenance, saving time and providing more reliable results.
Total Process Control
Continuous in-line monitoring of the timber thickness and width provides total process control allowing the boards to be graded and or sorted very efficiently.
Control System Integration
The measurements from the TSorter can be used by the sawmill control system as part of the plant automation to improve efficiency and yield.
LIMAB provides a complete turn-key solution, one contractor takes full responsibility. The TSorter includes all the hardware and software needed for any factory installation. LIMAB provides commissioning, training and ongoing product support and service.
|Measuring Range (Thickness)||200 mm|
|Accuracy (Thickness)||± 0.5 mm (Conveyer Dependant)|
|Power Supply||18-36 VDC, Galvanically Isolated|
|Serial RS232C Interface||1200-112,500 bit/sec ASCII/Comp. ASCII/HEX|
|Parallel Interface||Binary, BCD, 14 bit optical isolated NPN/PNP|
|Encoder Input||Incremental, grey code. A,B 1000-65000 ppr|
|Controller Box Dimensions||400 x 300 x 120 mm|
|PreciCuraSR Dimensions||162 x 108 x 42 mm|
|Protection Class||IP 65, NEMA 4|
|Operating Temperature||0-40 ºC|